Little Window Detail
 
I basically built a little window and cracked a piece of the acrylic around where the little teddy "shot" through it. Then lit it from side with a couple of Red LED's.
This will look a lot better when I get the rest of the Lighting.
Fan Grills.
I decided that the grill that came on the front just wasn't doing it. So we created on from a Teddys head. I created two similar ones. I couldn't decide which one I like more so I put one on the back. This way we can swap out whenever we feel the need.
Here they are cut and ready to go. Concensus around work is the one on the right is best.
The front Detail
Wide shot
The back fan grill
Installation of Lights and Lightbus
Well, I installed 2 Blue Metorlights on the top, 2 White CCFL's behind the MB side art, A red Thunder CCFL in the center bottom, 4 Red LED case feet, 2 Red LED pads around the Bear in the window, and 2 more on either side of the MB side case art. I then hooked up everything except the lighted feet and the Meteor lights to the Lightbus. This is all without any hardware yet which will be installed on monday when Brandon brings his computer into work
.
This is with all the lighting on and turned up all the way. The Lightbus has a dimmer on it along with a ton of other features. So I can make each light as bright or Dim as I so desire. Here is a series of pics showing the dimming of the MB side art.
The LightBus has up to 627 effects on it according to the box. Its really quite insane. I did a review of it and will have it posted on the CaseModGod main site. To read it click here.
I will need to do a little tweaking here and there and will have to find a way to difuse the white CCFL's so they don't show as light bars. so stay tuned.
| 
